Difference between revisions of "ECE438 Week6 Quiz" - Rhea

Revision as of 07:46, 27 September 2010

$ \text{ Sample a continuous signal x(t)=sin(}\omega t)\text{ with period of T, } $

1) In order to avoid aliasing, what is the maximum value of T? Write down the discrete time signal x(n) with the maximum T. Answer here.

2) The system diagram is as follows.

In order to get rid of aliasing, what is the cut-off frequency of the low pass filter? Explain your answer. Answer here.

The following two systems are used to process a signal

Assume that the input signal X(f) and the continuous time filter H(f) are both band limited to 1/(2T).

3. $ \text{Compute expressions for Y} (e^{j\omega})\text{ and H}(e^{j\omega}) $.

4. Show that when

$ G(e^{j\omega}) = \sum_{n=-\infty}^{\infty} H \Bigg( \frac{\omega - 2k\pi}{2k\pi}\Bigg) $

then the output of the two systems is equal.

Answer here.

5. The following system shows an interpolator with discrete input x[n]. Assume that the low pass filter has frequency response

$ H(e^{j\omega}) = 2rect(\omega / \pi ) \text{ for } \left | \omega \right | < \pi $.

Compute the z[n] for the following inputs.

$ \text{a. }x[n] = \delta [n] $

$ \text{b. }x[n] = \delta [n-1] $

$ \text{c. }x[n] = 1 $

$ \text{d. }x[n] = cos [\pi n/4] $

Answer here.

6. The following system shows a decimator with discrete input x[n]. Assume that the low pass filter has frequency response

$ H(e^{j\omega}) = rect(\omega / \pi ) \text{ for } \left | \omega \right | < \pi $.

Compute the z[n] for the following inputs.

$ \text{a. }x[n] = \delta [n] $

$ \text{b. }x[n] = \delta [n-1] $

$ \text{c. }x[n] = 1 $

$ \text{d. }x[n] = cos [\pi n/4] $

Answer here.

Back to Lab Wiki