Difference between revisions of "DTFT of a sampled cosine Yijun ECE438 slecture" - Rhea

Revision as of 13:04, 27 September 2014

outline

• Introduction
• Sampling rate above Nyquist rate
• Sampling rate below Nyquist rate
• Conclusion
• References

Introduction

Consider a CT cosine signal (a pure frequency), and sample that signal with a rate above or below Nyquist rate. In this slecture, I will talk about how does the discrete-time Fourier transform of the sampling of this signal look like. Suppose the cosine signal is $ x(t)=cos(2pi*440t) $.

Sampling rate above Nyquist rate

The Nyquist sampling rate $ fs=2fM=880 $,so we pick a sample frequency 1000 which is above the Nyquist rate.

$ \begin{align} \\ x_1[n] & =x(\frac{n}{1000}) \\ & =cos(\frac{2\pi440*n}{1000}) \\ & =\frac{1}{2}(e^{\frac{j2\pi440*n}{1000}}+e^{\frac{-j2\pi440*n}{1000}})\\ \end{align} $

since $ \frac{2\pi*440}{1000} $ is between $ -\pi $ and $ \pi $, so for $ \omega \isin [-\pi,\pi] $

$ \begin{align} \\ \mathcal{X}_1(\omega) & =\frac{1}{2}[2\pi\delta(\omega-2\pi\frac{440}{1000})+2\pi\delta(\omega+2\pi\frac{440}{1000})] \\ & = \frac{1000}{2}[\delta(\frac{1000}{2\pi}\omega-440)+\delta(\frac{1000}{2\pi}\omega+440)] \end{align} $

for all w

$ \mathcal{X}_1(\omega) = rep_{2\pi}{\frac{1000}{2}[\delta(\frac{1000}{2\pi}\omega-440)+\delta(\frac{1000}{2\pi}\omega+440)]} $

Sampling rate below Nyquist rate

Conclusion

References

[1].Mireille Boutin, "ECE438 Digital Signal Processing with Applications," Purdue University August 26,2009

Questions and comments

If you have any questions, comments, etc. please post them on this page.

Back to ECE438, Fall 2014