Contents
- 1 Some advice to help CNSIP graduate students fill out their plan of study
- 1.1 If you are a master's degree student:
- 1.2 If you are a direct PhD student interested in the signal processing area
- 1.3 If you are a PhD student (direct or with an MS) you should select your plan of study to prepare for the QE!
- 1.4 Note that the following math courses are not acceptable for ECE graduate students in the CNSIP area
Some advice to help CNSIP graduate students fill out their plan of study
If you are a master's degree student:
Please somebody fill something in.
If you are a direct PhD student interested in the signal processing area
- Consider taking ECE600 in addition to two other courses during your first semester. ECE600 is a prerequisite to a lot of other courses and a basic tool in CNSIP, but it can be challenging. Many students also take ECE538 and a math course such as MA511 that semester.
- A typical plan of study for a first semester Signal Processing Grad Student (MS or PhD) is: ECE600, ECE538, MA511
If you are a PhD student (direct or with an MS) you should select your plan of study to prepare for the QE!
Check the QE questions. Each QE question in CNSIP corresponds to a graduate course. You should:
- Select the QE questions you would like to take. (4 total with at least 1 out of area and at least 2 in area.)
- Make sure that your plan of study contains each corresponding course.
Normally, incoming PhD students take the QE in August, so you only have 2 semesters to prepare!
Note that the following math courses are not acceptable for ECE graduate students in the CNSIP area
- MA527: Advanced Mathematics For Engineers And Physicists I
- MA528: Advanced Mathematics For Engineers And Physicists II
- If you put these courses on your plan on study, then I won't sign it. --Mboutin 17:03, 16 January 2009 (UTC)
