(5 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:slecture]]
+
[[Category:bonus point project]]
 
[[Category:ECE438Fall2014Boutin]]  
 
[[Category:ECE438Fall2014Boutin]]  
 
[[Category:ECE]]
 
[[Category:ECE]]
 
[[Category:ECE438]]
 
[[Category:ECE438]]
[[Category:signal processing]]
+
[[Category:signal processing]]
 +
[[Category:z transform]]
 +
[[Category:tutorial]]
  
 
<center>
 
<center>
==Inverse Z Transform *under construction last updated 2pm 12/20/14*==
+
==Inverse Z Transform==
 +
Student project for [[2014_Fall_ECE_438_Boutin|ECE438 Fall 2014]]
 
</center>
 
</center>
 
+
----
 
----
 
----
 
'''Introduction'''
 
'''Introduction'''
Line 31: Line 34:
 
----
 
----
 
'''Region of Convergence (ROC)'''
 
'''Region of Convergence (ROC)'''
The ROC determines the region on the Z Plane where the Z Transform converges. The ROC depends solely on the 'r' value that is contained in 'z'. The ROC is always one of three cases;
+
The ROC determines the region on the Z Plane where the Z Transform converges. The ROC depends solely on the 'r' value that is contained in 'z'. The ROC is one of three cases;
 
:1. The ROC starts from a circle centered at the origin and fills in toward the origin
 
:1. The ROC starts from a circle centered at the origin and fills in toward the origin
 
:2. The ROC starts from a circle centered at the origin and extends outward to infinity
 
:2. The ROC starts from a circle centered at the origin and extends outward to infinity
Line 174: Line 177:
 
----
 
----
 
'''Using Matlab to find Inverse Z Transforms'''
 
'''Using Matlab to find Inverse Z Transforms'''
[http://www.mathworks.com/help/symbolic/iztrans.html]
+
[http://www.mathworks.com/help/symbolic/iztrans.html|mathworks.com]
 
----
 
----
 
'''Additional links'''
 
'''Additional links'''
[https://www.youtube.com/watch?v=wG6VUnkrO90|Good instructional video]
+
*[https://www.youtube.com/watch?v=wG6VUnkrO90|Good instructional video]
[https://www.projectrhea.org/rhea/index.php/Z_Transform_table|Z Transform Pairs and Properties]
+
*[[Z_Transform_table|Z Transform Pairs and Properties]]
 
----
 
----
 
'''Questions, Comments'''
 
'''Questions, Comments'''
please post here (Make New Page)
+
-
 +
-
 +
-
 +
----
 +
[[2014_Fall_ECE_438_Boutin|Back to ECE438 Fall 2014]]

Latest revision as of 18:11, 23 February 2015


Inverse Z Transform

Student project for ECE438 Fall 2014



Introduction The Z Transform is the generalized version of the DTFT. You can obtain the Z Transform from the DTFT by replacing $ e^{j\omega} $ with $ re^{j\omega} $ which is equivalent to z. The The DTFT is equal to the Z Transform when $ |z| =1 $

$ \begin{align} \text{DTFT: } X(w) &= \sum_{n=-\infty}^\infty x[n]e^{-j\omega n}\\ \text{Z-Transform: } X(z) &= \sum_{n=-\infty}^\infty x[n]z^{-n}\\ \text{Inv. Z-Transform: } x[n] &= \frac{1}{2\pi j}\oint_{c}X(z)z^{n-1}dz \end{align} $


Region of Convergence (ROC) The ROC determines the region on the Z Plane where the Z Transform converges. The ROC depends solely on the 'r' value that is contained in 'z'. The ROC is one of three cases;

1. The ROC starts from a circle centered at the origin and fills in toward the origin
2. The ROC starts from a circle centered at the origin and extends outward to infinity
3. The ROC is the space in between two circles centered at the origin.

If the ROC includes the unit circle then the DTFT converges for that function if it is not included, then it does not.

$ \begin{align} \text{Remember: } z &=re^{j\omega} \end{align} $

The ROC is determined when preforming Z transforms and is given when preforming inverse Z transforms.


Solving an inverse Z Transform To find the Inverse Z transform of signals use manipulation then direct Inversion. Do not use formula directly!

The Infinite Geometric Series formula is used in most problems involving Inv. Z transform.

$ \begin{align} \text{Infinite Geometric Series: } X(z) &= \sum_{n=-\infty}^{\infty} (a)r^{n} u[n]\\ &= \sum_{n=0}^{\infty} (a)r^{n}\\ &= \frac{a}{1-r}\\ \end{align} $

it can be seen that this general form is already starting to look like that of the Z Transform, with some change of variables we can manipulate this equation to be that of a Z transform and then by comparison find the inverse z transform.


Examples

Ex. 1 Find the Inverse Z transform of the following signal

$ X(z)=\frac{1}{1-z}, \text{ ROC } |z|<1 $

notice: ROC is type 1

Solution

$ \begin{align} X(x) &= \frac{1}{1-z}\\ &= \sum_{n=0}^{\infty} 1(z^{n}) \text{ if } |z| < 1\\ &= \sum_{n=-\infty}^{\infty} z^{n} u[n]\\ &\text{let }k = -n\\ &= \sum_{k=-\infty}^{\infty} z^{-k} u[-k]\\ &= \sum_{k=-\infty}^{\infty}u[-k] z^{-k}\\ &\text{By comparison with the Z Transform definition..}\\ x[n] &= u[-n]\\ \end{align} $

Ex. 2 Find the Inverse Z transform of the following signal

$ X(z)=\frac{1}{1-z}, \text{ ROC } |z|>1 $

notice: ROC is type 2

Solution

$ \begin{align} X(z) &= \frac{1}{1-z} \\ &= \frac{1}{z} \frac{1}{1-(-\frac{1}{z})}\\ & \text{Using a infinite Geometric series...}\\ &= \sum_{n=0}^{\infty} (\frac{-1}{z})^{n}\frac{1}{z} \text{ if } |-\frac{1}{z}| < 1\\ &= \sum_{n=0}^{\infty}(-1)^{n} z^{-n-1} \\ &= \sum_{n=-\infty}^{\infty} (-1)^{n} z^{-n-1} u[n]\\ &\text{ let } k=n+1 \\ &= \sum_{k=-\infty}^{\infty}(-1)^{k-1} z^{-k} u[k-1] \\ &= \sum_{k=-\infty}^{\infty} (-1)^{k-1} u[k-1] z^{-k}\\ &\text{By comparison with the Z Transform definition...}\\ x[n] &=(-1)^{n-1} u[n-1]\\ \end{align} $

Ex. 3 Find the Inverse Z transform of the following signal

$ X(z)=\frac{z}{1-5z}, \text{ ROC } |z|<\frac{1}{5} $

notice: ROC is type 1

Solution

$ \begin{align} X(x) &= \frac{z}{1+5z}\\ &= \frac{z}{1-(-5z)}\\ &= \sum_{n=0}^{\infty} z(-5z^{n}) \text{ if } |z| < \frac{1}{5}\\ &= \sum_{n=-\infty}^{\infty} (-5)^{n}z^{n+1} u[n]\\ &\text{let }k = -n-1\\ &= \sum_{k=-\infty}^{\infty} (-5)^{-k-1}z^{-k} u[-k-1]\\ &= \sum_{k=-\infty}^{\infty}(-5)^{-k-1}u[-k-1] z^{-k}\\ &\text{By comparison with the Z Transform definition...}\\ x[n] &= (-5)^{-n-1}u[-n-1]\\ \end{align} $

Ex. 4 Find the Inverse Z transform of the following signal

$ X(z)=\frac{1}{1-2z}, \text{ ROC } |2z|>1 $

notice: ROC is type 2

Solution

$ \begin{align} X(z) &= \frac{1}{1-2z}\\ &= \frac{1}{2z} \frac{1}{1-(-\frac{1}{2z})}\\ &= \sum_{n=0}^{\infty} (\frac{-1}{2z})^{n}\frac{1}{2z} \text{ if } |-\frac{1}{2z}| < 1\\ &= \sum_{n=0}^{\infty} (-2z)^{-n}(2z)^{-1}\\ &= \sum_{n=-\infty}^{\infty} \frac{1}{2}(-2)^{-n}z^{-n-1} u[n]\\ &\text{ let } k=n+1\\ &= \sum_{k=-\infty}^{\infty} \frac{1}{2}(-2)^{-k+1}u[k-1] z^{-k}\\ &\text{By comparison with the Z Transform definition...}\\ x[n] &= \frac{1}{2}(-2)^{-k+1}u[n-1]\\ \end{align} $

Ex. 5 Find the Inverse Z transform of the following signal

$ X(z)=\frac{-1}{z^2-4z-5}, \text{ ROC } 1<|z|<5 $

notice: ROC is type 3

Solution

$ \begin{align} X(z) &= \frac{-1}{z^2-4z-5}\\ &\text{ by partial fraction expansion}\\ &= \Big( \frac{1}{6} \Big)\Big( \frac{1}{z+1}+\frac{1}{5-z} \Big)\\ & \text{by infinite geometric series}\\ &= \Big( \frac{1}{6} \Big) \Bigg( \sum_{n=0}^{\infty} (\frac{1}{z})(\frac{-1}{z})^{n} + \sum_{m=0}^{\infty} (\frac{1}{5})(\frac{z}{5})^m \Bigg) \text{ if } 1<|z|< 5\\ &=\Big( \frac{1}{6} \Big) \Bigg( \sum_{n=-\infty}^{\infty} (-1)^n(z)^{-n-1}u[n] + \sum_{m=-\infty}^{\infty} (5)^{-m-1)}(z)^{m}u[m] \Bigg)\\ & \text{let } k=n+1, l=-m\\ &= \Big( \frac{1}{6} \Big) \Bigg( \sum_{k=-\infty}^{\infty} (-1)^{k-1}(z)^{-k}u[k-1] + \sum_{l=-\infty}^{\infty} (5)^{l-1)}(z)^{-l}u[-l] \Bigg)\\ & \text{using the linearity principle of Z transforms}\\ x[n] &= \frac{1}{6}(-1)^{n-1}u[n-1] + \frac{1}{6} (5)^{n-1)}(z)^{-n}u[-n] \end{align} $


Using Matlab to find Inverse Z Transforms [1]


Additional links


Questions, Comments - - -


Back to ECE438 Fall 2014

Alumni Liaison

Abstract algebra continues the conceptual developments of linear algebra, on an even grander scale.

Dr. Paul Garrett