(New page: Suggested problems from Oppenheim and Willsky ==Chapter 7== 7.1, 7.2, 7.3, 7.4, 7.5, 7.7, 7.10, 7.22, 7.29, 7.31, 7.33 ==Chapter 8== 8.1, 8.2, 8.3, 8.5, 8.8, 8.10, 8.11, 8.12, 8.21, 8.23 ...)
 
(Chapter 7)
Line 2: Line 2:
  
 
==Chapter 7==
 
==Chapter 7==
 +
 +
#'''Sampling'''
 +
##Impulse Train Sampling
 +
##The Sampling Theorem and the Nyquist
 +
#'''Signal Reconstruction Using Interpolation:''' the fitting of a continuous signal to a set of sample values
 +
##Sampling with a Zero-Order Hold (Horizontal Plateaus)
 +
##Linear Interpolation (Connect the Samples)
 +
#Undersampling: Aliasing
 +
#Processing CT Signals Using DT Systems (Vinyl to CD)
 +
##Analog vs. Digital: The Show-down (A to D conversion -> Discrete-Time Processing System -> D to A conversion
 +
#Sampling DT Signals (CD to MP3 albeit a complicated sampling algorithm, MP3 is less dense signal)
 +
 
7.1, 7.2, 7.3, 7.4, 7.5, 7.7, 7.10, 7.22, 7.29, 7.31, 7.33
 
7.1, 7.2, 7.3, 7.4, 7.5, 7.7, 7.10, 7.22, 7.29, 7.31, 7.33
 +
 
==Chapter 8==
 
==Chapter 8==
 
8.1, 8.2, 8.3, 8.5, 8.8, 8.10, 8.11, 8.12, 8.21, 8.23
 
8.1, 8.2, 8.3, 8.5, 8.8, 8.10, 8.11, 8.12, 8.21, 8.23

Revision as of 01:57, 5 December 2008

Suggested problems from Oppenheim and Willsky

Chapter 7

  1. Sampling
    1. Impulse Train Sampling
    2. The Sampling Theorem and the Nyquist
  2. Signal Reconstruction Using Interpolation: the fitting of a continuous signal to a set of sample values
    1. Sampling with a Zero-Order Hold (Horizontal Plateaus)
    2. Linear Interpolation (Connect the Samples)
  3. Undersampling: Aliasing
  4. Processing CT Signals Using DT Systems (Vinyl to CD)
    1. Analog vs. Digital: The Show-down (A to D conversion -> Discrete-Time Processing System -> D to A conversion
  5. Sampling DT Signals (CD to MP3 albeit a complicated sampling algorithm, MP3 is less dense signal)

7.1, 7.2, 7.3, 7.4, 7.5, 7.7, 7.10, 7.22, 7.29, 7.31, 7.33

Chapter 8

8.1, 8.2, 8.3, 8.5, 8.8, 8.10, 8.11, 8.12, 8.21, 8.23

Chapter 9

9.2, 9.3, 9.4, 9.6, 9.8, 9.9, 9.21, 9.22

Chapter 10

10.1, 10.2, 10.3, 10.4, 10.6, 10.7, 10.8, 10.9, 10.10, 10.11, 10.13, 10.15, 10.21, 10.22, 10.23, 10.24, 10.25, 10.26, 10.27, 10.30, 10.31, 10.32, 10.33, 10.43, 10.44.

Note: If a problem states that you should use “long division”, feel free to use the geometric series formula instead.

Alumni Liaison

Correspondence Chess Grandmaster and Purdue Alumni

Prof. Dan Fleetwood