Revision as of 15:01, 26 April 2015 by Cdhamija (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


Maximum Power Transferred Practice Problem

Practice question for ECE201: "Linear circuit analysis I"

By: Chinar Dhamija

Topic: Maximum Power Transferred


Question

What is the maximum power transferred to the load resistor.

ECE201 P1.png


Answer

Ground is located at the bottom of the circuit. First we need to find voltage and current from the perspective of the resistor load. In order to do that we need to deactivate all the independent sources and add a test source in place of RL as shown in the image below.

ECE201 P1 1.png

In this case we added a 1V test source. Since we have our Vtest we need to find Itest, which can be found by using loop analysis. Let's call the 'first loop in the left box' I1 going clockwise and the 'second loop in the right box' as I2 going counterclockwise. Using loop analysis we can come up with our two equations:

I1: 6I1 + 6(I1 + I2) = 0
I2: -1 + 5I2 + 3V1 + 6(I2 + I1) = 0

To analyze only 2 unknowns we can write V1 in terms of I1 and I2.
V1 = 6(I1 + I2)
Then substitute above equation in place of V1:
I1:

    12I1 + 6I2 = 0
I2 = -2I1

I2:

    -1 + 5I2 + 3(6(I1 + I2)) + 6(I2 + I1) = 0
-1 + 5I2 + 18I1 + 18I2 + 6I2 + 6I1 = 0
-1 + 29I2 + 24I1 = 0

Plug I1 into the I2 equation:

    -1 + 29(-2I1) + 24I1 = 0
I1 = -1/34
I2 = 1/17

I2 = Itest = 1/17A
Vtest = 1V

Now we can find the equivalence resistance:
Rth = Rs = Vtest/Itest

     = 17Ω

Vs = 12(6 / (6 + 6)) + 12

    = 18V

Pmax = Vs^2 / 4Rs

         = 18^2 / (4 * 17)
         = 4.76 W

Questions and comments

If you have any questions, comments, etc. please post them below

  • Comment 1
    • Answer to Comment 1
  • Comment 2
    • Answer to Comment 2

Back to 2015 Spring ECE 201 Peleato

Back to ECE201

Alumni Liaison

Correspondence Chess Grandmaster and Purdue Alumni

Prof. Dan Fleetwood